Anmol Chemicals is the pioneer manufacturers of Aluminium Glycinate or Dihydroxyaluminum Aminoacetate, Pharmaceutical Excipients Food & Flavor chemicals in India. We supply Halal and Kosher Aluminium Glycinate or Dihydroxyaluminum Aminoacetate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Aluminium Glycinate or Dihydroxyaluminum Aminoacetate is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ---------- Contact Dihydroxyaluminum Aminoacetate

Paletized ExportChemical Drums Export Import USA India Manufacturers Jumbo Export Bags Aluminium Glycinate or Dihydroxyaluminum Aminoacetate Manufacturers

Aluminium Glycinate BP Ph Eur Grade Manufacturers

Aluminium Glycinate SDS MSDS Sheet of Manufacturers

Aluminium Glycinate BP Grade
C2H6AlNO4-xH2O --- 135.1 --- CAS Number 41354-48-7
Action and use: Antacid.

DEFINITION
Aluminium Glycinate is a basic aluminium monoglycinate, partly hydrated. It contains not less than 34.5% and not more than 38.5% of Al2O3 and not less than 9.9% and not more than 10.8% of N, both calculated with reference to the dried substance.

CHARACTERISTICS
A white or almost white powder.
Practically insoluble in water and in organic solvents. It dissolves in dilute mineral acids and in aqueous solutions of the alkali hydroxides.

IDENTIFICATION
A. Add 0.1 g to 10 ml of a solution prepared by dissolving 0.84 g of citric acid in 8 ml of 1M sodium hydroxide and diluting to 20 ml with water. Add 0.5 ml of a 0.1% w/v solution of ninhydrin in methanol and warm. A purple colour is produced.
B. Suspend 1 g in 25 ml of 0.5M hydrochloric acid and heat gently until a clear solution is produced. Reserve half of the solution. To 2 ml of the solution add 0.15 ml of liquefied phenol , shake and add carefully without shaking 5 ml of dilute sodium hypochlorite solution. A blue colour is produced.
C. The solution reserved in test B yields the reaction characteristic of aluminium salts.

TESTS
Acidity or alkalinity: pH of a suspension of 1 g in 25 ml of carbon dioxide-free water, 6.5 to 7.5.
Neutralising capacity: Shake 0.2 g vigorously with 25 ml of 0.1M hydrochloric acid for 5 minutes and allow to stand for 5 minutes. The pH of the mixture is greater than 3.0.
Arsenic: Dissolve 2.0 g in 18 ml of brominated hydrochloric acid and 32 ml of water. 25 ml of the resulting solution complies with the limit test for arsenic, 1 ppm.
Heavy metals: Dissolve 1.5 g in 20 ml of 2M hydrochloric acid and 10 ml of water, add 0.5 ml of nitric acid and boil for about 30 seconds. Cool, add 2 g of ammonium chloride and 2 g of ammonium thiocyanate and extract with two 10 ml quantities of a mixture of equal parts of isoamyl alcohol and ether . To the aqueous layer add 2 g of citric acid. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution (1 ppm Pb) to prepare the standard (20 ppm).
Mercuric salts: To pass the test.
Chloride: Dissolve 1.0 g in 10 ml of 2M nitric acid and dilute to 100 ml with water. 15 ml of the resulting solution complies with the limit test for chlorides, Appendix VII (330 ppm).
Loss on drying: When dried to constant weight at 130C, loses not more than 12.0% of its weight. Use 1 g.

ASSAY
For Al2O3: Dissolve 0.25 g in a mixture of 3 ml of 1M hydrochloric acid and 50 ml of water, add 50 ml of 0.05M disodium edetate and neutralise with 1M sodium hydroxide using methyl red solution as indicator. Heat the solution to boiling, allow to stand for 10 minutes on a water bath, cool rapidly, add about 50 mg of xylenol orange triturate and 5 g of hexamine and titrate the excess of disodium edetate with 0.05M lead nitrate until the solution becomes red.
Each ml of 0.05M disodium edetate VS is equivalent to 2.549 mg of Al2O3.

Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

ISO9000 India Manufacturers

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Holand, Norway, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 17 January, 2022

Barter

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you